All posts by Raissa Logrono

Updated ANSI Cut Resistance Standards

We recently received a very helpful graphic to go along with the new ANSI/ISEA 105-2016 cut resistance standards from our friends at Magid. Cut resistance standards have caused confusion in the past because they can differ between countries and testing methods. Time will tell if these new standards eliminate the confusion, but for now they do look more intuitive. […]

The post Updated ANSI Cut Resistance Standards appeared first on Pro Tool Reviews.

Milwaukee M18 Fuel SDS-Plus Rotary Hammer 2715-22

Cordless rotary hammers may still have some catching up to do with the corded masonry scene, but the Milwaukee M18 Fuel SDS-Plus Rotary Hammer is leading the pack. Managing road crews, we end up drilling through concrete and asphalt quite a bit for various repairs and installations, but I’ve been hauling around a generator and […]

The post Milwaukee M18 Fuel SDS-Plus Rotary Hammer 2715-22 appeared first on Pro Tool Reviews.

Hitachi DH28PFY SDS-Plus Rotary Hammer

Hitachi has announced two new tools, adding to its growing concrete rotary hammers. The Hitachi DH28PFY SDS-Plus Rotary Hammer and its DH26PF brother are said to deliver higher durability thanks to three specific improvements. One is a hammering mechanism featuring an air channel system that reduces wear and damage inside the cylinder. The second improvement is […]

The post Hitachi DH28PFY SDS-Plus Rotary Hammer appeared first on Pro Tool Reviews.

OX Tools MIXM8 Mixing Paddle

The Ox Tools MixM8 Mixing Paddle certainly stands out in the crowd of mortar mixers. The traditional eggbeater, rectangular, and spiral designs are all more similar to one another than the MixM8 is to any of them. Like any guy that’s been doing it one way for over three decades, I was skeptical. Sure, the […]

The post OX Tools MIXM8 Mixing Paddle appeared first on Pro Tool Reviews.

Festool Planex LHS 225 Drywall Sander

Drywall sanding is a messy business at best and hazardous to your health at worst: prolonged exposure to respirable crystalline silica is responsible for many ailments. But Festool hopes to clean up with the Festool Planex LHS 225 drywall sander. The modular design features three lengths, two-speed gears, and adjustable suction power. Extensions allow a working height […]

The post Festool Planex LHS 225 Drywall Sander appeared first on Pro Tool Reviews.

Festool Planex LHS 225 Drywall Sander

Festool Planex LHS 225 Drywall SanderDrywall sanding is a messy business at best and hazardous to your health at worst: prolonged exposure to respirable crystalline silica is responsible for many ailments. But Festool hopes to clean up with the Festool Planex LHS 225 drywall sander. The modular design features three lengths, two-speed gears, and adjustable suction power. Extensions allow a working height […]

The post Festool Planex LHS 225 Drywall Sander appeared first on Pro Tool Reviews.

DeWalt ToughBox Job Site Chest

DeWalt ToughBox Job Site ChestDeWalt recently introduced the DeWalt ToughBox Job Site Chest for secure and organized tool and accessory storage. It’s made with a 16 gauge steel body, 14 gauge steel floor, and four-way skid access to its 7 gauge steel skids. Reinforcement comes from 11 gauge vertical ribs. It features a reinforced hat for lid stiffness, gas […]

The post DeWalt ToughBox Job Site Chest appeared first on Pro Tool Reviews.

DeWalt ToughBox Job Site Chest

DeWalt recently introduced the DeWalt ToughBox Job Site Chest for secure and organized tool and accessory storage. It’s made with a 16 gauge steel body, 14 gauge steel floor, and four-way skid access to its 7 gauge steel skids. Reinforcement comes from 11 gauge vertical ribs. It features a reinforced hat for lid stiffness, gas […]

The post DeWalt ToughBox Job Site Chest appeared first on Pro Tool Reviews.

Bora MiteriX Angle Measuring And Duplicator Tool

Bora MiteriX Angle Measuring And Duplicator ToolMeasuring an angle and transferring it to a miter saw is challenging, usually resulting in an imprecise fit and an unsightly gap. But the recently introduced Bora MiteriX angle measuring and duplicator tool strives to change that. The MiteriX accurately measures all inside and outside angles, allowing the craftsman to set miter saws for precise cuts. Furniture […]

The post Bora MiteriX Angle Measuring And Duplicator Tool appeared first on Pro Tool Reviews.

Bora MiteriX Angle Measuring And Duplicator Tool

Measuring an angle and transferring it to a miter saw is challenging, usually resulting in an imprecise fit and an unsightly gap. But the recently introduced Bora MiteriX angle measuring and duplicator tool strives to change that. The MiteriX accurately measures all inside and outside angles, allowing the craftsman to set miter saws for precise cuts. Furniture […]

The post Bora MiteriX Angle Measuring And Duplicator Tool appeared first on Pro Tool Reviews.