Tag Archives: Workwear Reviews & Safety Equipment

Updated ANSI Cut Resistance Standards

We recently received a very helpful graphic to go along with the new ANSI/ISEA 105-2016 cut resistance standards from our friends at Magid. Cut resistance standards have caused confusion in the past because they can differ between countries and testing methods. Time will tell if these new standards eliminate the confusion, but for now they do look more intuitive. […]

The post Updated ANSI Cut Resistance Standards appeared first on Pro Tool Reviews.

Wolverine Jetstream CarbonMax Safety Toe Shoe

In my never-ending quest for the perfect footwear for work, I’m constantly chasing comfort. After all, the challenge isn’t producing a shoe with a safety toe, puncture resistance, and stability, it’s doing it in a way that doesn’t leave your feet begging for mercy at the end of the day. More often than not, I […]

The post Wolverine Jetstream CarbonMax Safety Toe Shoe appeared first on Pro Tool Reviews.

OSHA Impact Rated Contact Lenses Expect Approval

In a surprise move, OSHA is expected to approve impact rated contact lenses that meet the current Z87 impact requirements. New lenses that meet the standard will officially be listed under OSHA 20170401.Z87C. Lenses that exceed the impact standards will be able to carry a “Z87C+” designation. This is the same designation listed for typical […]

The post OSHA Impact Rated Contact Lenses Expect Approval appeared first on Pro Tool Reviews.

ISOtunes Pro Noise Reducing Bluetooth Earbuds

Whether you’re on the jobsite, off on the long run, sitting on an airplane, or even just shopping at Walmart, there’s something that almost all of us understand universally – listening to music helps isolate us from all the bad mojo around and makes the time go by faster. When we have to wear hearing […]

The post ISOtunes Pro Noise Reducing Bluetooth Earbuds appeared first on Pro Tool Reviews.

Thermacell Halo, Backpacker, and Tick Control System

Thermacell Repellents recently introduced three new products for 2017 designed to keep outdoor activities pest-free: the Thermacell Halo, Thermacell Backpacker, and Thermacell Control System. Non-topical Thermacell repellent products are government tested and EPA approved, using technology that the US Department of Defense has employed to protected troops from mosquito-borne illnesses for years. And the Non-topical […]

The post Thermacell Halo, Backpacker, and Tick Control System appeared first on Pro Tool Reviews.

Ford F-150 Hybrid To Roll Out By 2020

Ford recently unveiled plans to introduce the Ford F-150 Hybrid by 2020 as part of an expansion that will create 700 direct new jobs and is part of a $4.5 billion investment in electrified vehicles. Ford F-150 Hybrid Details The F-150 Hybrid, built at Ford’s Dearborn Truck Plant, will operate as a mobile generator and be […]

The post Ford F-150 Hybrid To Roll Out By 2020 appeared first on Pro Tool Reviews.

Grundens Rain Gear Review: Herkules Bib Pants and Ragnar Jacket

The Grundens Herkules Bib Pants and Ragnar Jacket are designed to keep the wind and water from interfering with sport, commercial, and onshore fishing activities. As the company’s story goes, around a century ago a Swede named Carl Grundén, the son of a fisherman, began to manufacture water-repellent garments to withstand the forces of nature. Grundens rain […]

The post Grundens Rain Gear Review: Herkules Bib Pants and Ragnar Jacket appeared first on Pro Tool Reviews.

Walls Workwear Jack-Shirt with Kevlar

For all of the oppressive summer (and sometimes fall) heat in Central Florida, the Pros here rarely have to worry about bundling up to get the job done. But there are times when we need workwear appropriate for chilly temperatures. You know, for the few days that dip below 60 degrees! Late winter and early […]

The post Walls Workwear Jack-Shirt with Kevlar appeared first on Pro Tool Reviews.

Dickies Pro with Cordura Military Grade Fiber

Dickies and Invista’s Cordura brand have teamed up to create the Dickies Pro with Cordura Military Grade Fiber Technology collection, crafted specifically for the skilled tradesman working in severe weather conditions who need light and abrasion-resistant clothing. The Cordura military-grade component is Invista’s patent-pending T420HT fiber and cotton-rich ripstop fabric that combine to form the […]

The post Dickies Pro with Cordura Military Grade Fiber appeared first on Pro Tool Reviews.

OEMTools 600 Lumen Cordless LED Work Light Video Review

Without light, we don’t exist. Trying to complete a job in a workspace with little to no light feels much the same. This is when you need the OEMTools cordless LED work light that projects 600 lumens of LED splendor upon your work area. The OEMTools model 25997 lasts for up to six hours, while […]

The post OEMTools 600 Lumen Cordless LED Work Light Video Review appeared first on Pro Tool Reviews.